PM Maintenance Tech - 1st Shift
Company: Faribault Foods
Location: Tucson
Posted on: April 17, 2024
|
|
Job Description:
Description Faribault Foods Inc., the leading food manufacturing
plant located in Rita Ranch, is looking for an experienced and
safety-conscious UtilitiesTechnician to join our line maintenance
team! We manufacture, can, and supply whole beans, refried beans,
and enchilada sauces in over 15 branded items and numerous custom
private labels.The primary purpose of the Preventative Maintenance
Technician is to ensure continued operation, maintenance, and
repairs of all Company equipment. Perform equipment repair and
maintenance and perform preventative maintenance to maximize
equipment uptime. Ensure that maintenance work performed maintains
or improves product quality and production efficiency. Maintain
plant efficiency and a safe working environment.
Maintenance performance shall be consistent with company goals,
business unit Key Performance Indicators (KPI's) to include safety,
quality, efficiency, productivity, and customer service.1st
Shift:
Friday - Monday - 10 hour shiftsESSENTIAL DUTIES AND
RESPONSIBILITIES: The following is a list of duties to be performed
however, the duties are in no way limited to/by the list.
Participate as a Team Member of the assigned Business
As a member of the shift Maintenance Team provide rapid response to
equipment related problems to maximize equipment uptime and
production
Apply maintenance troubleshooting skills in a wide variety of
machine applications in response to production
Communicate information to Maintenance Coordinator and to the
Production Supervisor regarding technical issues, equipment
problems, and continuous improvement
Document equipment repairs/findings onto work orders for input into
the Computerized Maintenance Management System (Maximo). Perform
interface and troubleshoot of Programmable Logic Controls (PLC's)
and PLC controlled equipment with a Lap Top Computer and various
plug-in
Generate work orders, enter and retrieve data from the CMMS
Troubleshoot control wiring, relay logic, motor drive circuits,
control system devices, photo eyes, limit switches, proximity
switches, and
Utilize Digital Volt Meter, Mega OHM Meter and AMP probes to
diagnose electrical
Operate and calibrate automation systems in order to provide
accurate
Perform Preventive Maintenance (PM's), inspections and/or repair of
equipment during shutdowns which may require weekend work and/or
shift reassignment in response to production requirements. Support
the installation and start-up of new
Perform welding and machine shop tasks related to repair of
equipment and
Work with equipment vendors or technical representatives on
re-builds, service visits and equipment training to reduce
downtime. Work directly with Production personnel, Quality
personnel, and support members to problem-solve and trouble-shoot
to correct machine malfunctions. Assist operators in machine
change- Perform mechanical, electrical, pneumatic, and hydraulic
installation, repair and service of machinery and support systems
as
Perform systematic preventive maintenance, including electrical and
mechanical adjustments, inspections and minor repairs on plant
equipment as
Complete special projects as required, including design and repair
work on material handling systems and other mechanical and
electrical devices. Design and fabricate parts to improve machine/
equipment operation and
Address all mechanical, electrical, material and safety
discrepancies as detected and/or report these discrepancies to
appropriate personnel as necessary. Rotate jobs within business
unit and with other business units as assigned. Rotate on
alternative shifts as
Train production technicians and maintenance personnel as
Maintain proper safety conditions of equipment and of Company
Maintain an organized, clean and safe work
Work in confined and tight Demonstrate good
Effectively read, write, speak and comprehend
Comply with area Standard Operating Procedures (SOPs), Quality
Assurance Parameters (QAPs), Good Manufacturing Process (GMPs)
Procedures, and ISO Be knowledgeable in all required Quality
Assurance checks and in HACCP related items. Comply with all
company safety procedures and guidelines and comply with all
company guidelines and
Clean and sanitize machines to meet legal and quality
Maintain a clean, organized work area respecting GMPs.
Ensure that job operations maintain or improve product
Stop and correct job operation if product quality is affected
negatively. Work daily overtime and weekends as
Maintain OSHA Certified Forklift License (if applicable).
Demonstrate good
Effectively read, write, speak and comprehend
Requirements QUALIFICATIONS/ REQUIREMENTS: To perform this job
successfully, an individual must be able to perform each essential
duty satisfactorily. The requirements listed below are
representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with
disabilities to perform the essential functions.EDUCATION and/or
EXPERIENCE: High school diploma or equivalent; one to three years
related experience and/or training; or equivalent combination of
education and experience. Demonstrated training and experience in
electrical, mechanical, pneumatic, electronic, pneumatic and
Programmable Logic Controllers preferred. Preferred experience in
those fields with an emphasis in high-speed packaging. Demonstrated
training and experience in steam/boilers, air handling systems,
ammonia systems, plumbing systems, welding, and millwrighting
preferable. Working knowledge of hand and power tools. Ability to
read blue prints, diagrams and schematics. Ability to work with
limited supervision and perform effectively in a team-oriented
environment. Working knowledge of computers and software
applications, preferably with MS Office applications.LANGUAGE
SKILLS: Ability to read, write, speak and comprehend English.
Ability to read and comprehend moderate to complex instructions,
short correspondence, and memos. Ability to write technical
correspondence. Ability to effectively present information in
one-on-one and small group situations to production team members,
other technicians, and management.MATHEMATICAL SKILLS: Ability to
add, subtract, multiply, and divide in all units of measurement,
using whole numbers, common fractions and decimals. Ability to
compute ratio, percent, draws and interprets bar graphs.REASONING
ABILITY: Ability to apply commonsense understanding to carry out
detailed written or oral instructions. Ability to deal with
problems involving a few concrete variables in standardized
situations.PHYSICAL DEMANDS: The physical demands described here
are representative of those that must be met by an employee to
successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with
disabilities to perform the essential functions.While performing
the normal duties of this position, a Maintenance Technician must
have the ability to visually identify defective parts. The employee
is regularly required to walk and talk and hear. The employee
frequently is required to stand, sit, and stoop, kneel, push,
couch, or crawl. The employee is occasionally required to climb on
ladders and portable stairways, or balance. Must be able to climb
into machinery for cleaning purposes. The team member must also
have the ability to hear machine operations sounds that may
indicate defective parts, machine failures, changes in speed and
other routine running conditions. Must be able to work on multiple
levels, such as catwalks, ladders, etc. Must be able to demonstrate
manual and finger dexterity. Must be able to work extended hours
and/or overtime as required.
The team member frequently is required to stand or walk. The team
member is required to use hands to finger, handle, or feel objects,
tools, or controls and reach with hands and arms. The team member
must perform heavy lifting and/or moving of up to 50 pounds.
Specific vision abilities required by this job include close
vision, distance vision, and color vision, depth perception, and
the ability to adjust focus.WORK ENVIRONMENT: The work environment
characteristics described here are representative of those a team
member encounters while performing the essential functions of this
job. Reasonable accommodations may be made to enable individuals
with disabilities to perform the essential functions.While
performing the duties of this job, the team member regularly works
near moving mechanical parts. The team member is frequently exposed
to fumes of airborne particles and toxic chemicals. The individual
must be able to wear the appropriate protective equipment to
accommodate the protection needs of the present hazard. While
performing the duties of this job, the employee regularly works
near moving mechanical parts. The employee frequently works in
high, precarious places and is frequently exposed to toxic or
caustic chemicals, extreme cold, and risk of electrical shock. The
employee occasionally works in outside weather conditions. The
operator will be exposed to wet and humid conditions and have to
work with cleaning chemicals, toxic chemicals, and some dust in the
atmosphere. The noise level in the work environment is at a level
that hearing protection must be worn. Working in close proximity
with moving forklift trucks is required.Experience maintaining
Industrial equipment
Able to use shop tools - hand and power tools Troubleshoot
mechanical applications Mechanical repairs, Milling -machining
Basic Electrical troubleshooting experienceFaribault Foods Inc.
(FFI) is proud to be an Equal Opportunity Employer.
FFI does not discriminate based on age, ethnicity, race, sex,
gender, religion, national origin, creed, tribal affiliation,
ancestry, gender identity, sexual orientation, marital status,
genetic information, veteran status, socio-economic status, as well
as any other class protected by law.Faribault Foods' Benefits and
Compensation:-Paid Time Off, Holiday Pay, and paid End of Year Shut
Down-Health Insurance (Medical, Dental, & Vision) - after 60
days-Employee Assistance Program-401(k) Retirement Plan & Employer
Match-Tuition Reimbursement-Perfect Attendance Incentives-Life
Insurance - Company paid-Short-Term & Long-Term Disability -
Company paid-Job Progression Program - Earn as You Learn-Employee
of the Month Recognition Program-Wellness Program - Up to $150 in
rewards-On-campus gym; free weights, elliptical, treadmill,
etc.-Employee referral bonus $200, for both employee and
referral-Provided uniform shirts twice a year - Company
paid-Reimburse up to $150 for steel toe boots every six months
Keywords: Faribault Foods, Drexel Heights , PM Maintenance Tech - 1st Shift, Professions , Tucson, Arizona
Click
here to apply!
|